The daily maintenance of the dispensing machine will directly affect the service life and use effect of the dispensing. How to maintain the plastic drop machine/dispensing machine daily ?
1. To replace the PVC glue, the pipeline needs to be cleaned. At this time, first close the feed valve, open the discharge valve, and discharge the remaining glue material in the rubber bucket, close the discharge valve, open the feed valve, pour the cleaning solvent into the rubber storage tank, activate the machine, and press the solvent out according to the usual operation method. out rinse.
the
2. If the air intake is abnormal and there is water vapor, please remove the water vapor in the pressure regulating filter or check whether there is any abnormality in the air pressure source. Before the glue is used in large quantities, please try it out in a small amount first, and master the skills of using the product to avoid mistakes. The vacuum system vacuumizes and defoams the glue to remove the air bubbles generated during the stirring process, or let it stand for 10-20 minutes before using it, so that the air bubbles generated during mixing can be removed in time, and the amount of glue mixed together is more.
the
3. Please wipe clean the machine part regularly to increase the service life. The more the amount of glue mixed together, the faster the reaction and the faster the curing speed, so the glue should be properly mixed according to the actual production situation, otherwise the glue will be wasted. Eliminate accidents and improve production efficiency. Nowadays, liquid control technology and dispensing equipment are widely used in various production fields in modern industry.
the
4. When the machine is not in use for a long time, the power should be unplugged, which can not only prolong the life of the machine but also save costs. With the needs of ever-changing industrial development, liquid control technology and dispensing equipment are also constantly developing to ultra-high precision control and diversification and specialization.
the
P.S. Clean it well after use, wipe the places that can be seen, wipe it with alcohol, it is best to put some oil or butter on the parts that move frequently, and keep it lubricated. If it is not used for a long time, the glue must be polished , otherwise it will solidify in the LED dispensing machine
Post time: Jun-19-2023